Understanding Post Results; Diagnosing Problems - Cisco WS-C2950-24 Hardware Installation Manual

Understanding POST Results

Understanding POST Results
Note

Diagnosing Problems

Catalyst 2950 Desktop Switch Hardware Installation Guide
3-2
While the switch powers on, it automatically begins POST, a series of tests that
verifies that the switch functions properly. When the switch begins POST, the
system LED is off. If POST completes successfully, the LED turns green. If POST
fails, the LED turns amber.
POST failures are usually fatal. Call Cisco Systems if your switch does not
pass POST.
Common switch problems fall into these categories:
Poor performance
•
• No connectivity
Corrupted software
•
Table 3-1 describes how to detect and solve these problems.
Chapter 3 Troubleshooting
78-11157-02