Panasonic DP-2000 Operating Instructions Manual page 42

Installation and Configuration (Windows NT 4.0)
• Device Gamma
Adjust the gamma of print images (color intensities).
• Pixel Diameter
Adjust the darkness of the print image. Manipulate the slider to specify the pixel size. You can select
between specifying the real size in inches or specifying in percentage relative to the printer resolution.
• Luminance (CIE Y)
Adjust the luminosity of the print image.
Duplex Unit
Check this checkbox if Automatic Duplex Unit (DA-MD200) is installed.
enabled.
Output Tray
If Exit Tray (Inner) and Dual-Path Exit Guide Unit (DA-XN200/FK200) are installed, select inner option.
This allows specifying Inner 1 and Inner 2 as output bins for printer output.
If 1-Bin Finisher or Exit Tray (Outer) (DA-FS200/XT200) is installed, select inner option + outer option.
This allows specifying inner 1, inner 2, and outer as output bins for printer output. Also, stapling function
becomes available if inner option and outer option are enabled.
Number of Paper Tray
Select the number of available paper tray for printer if an optional Paper Feed Module is installed.
Printer/Fax Memory
Select the size of the Expansion Flash Memory Card to enable the Secure Print.
Secure Print Password
Set the password for Secure Print.
42
Duplex printing function is