Table of Contents
Advertisement
ENGLISH
10
Personalizing your brushing experience
Sonicare automatically starts in the default Clean
mode. To personalize your brushing:
1
Prior to turning on the Sonicare, press the
personalized brushing button to toggle
between modes and routines.
, The green LED indicates the selected mode
or routine.
Note: When the toothbrush is turned on, you can
switch between modes but not between routines.
Routines should be selected prior to brushing.
Brushing modes
Clean mode
Standard mode for superior teeth cleaning.
White mode
2 minutes of Clean mode, with an additional
30 seconds of White mode to focus on your
visible front teeth.
White mode brushing instructions
1
Brush the first 2 minutes as explained in
section 'Brushing instructions'.
2
After the 2 minutes of Clean mode, the White
mode starts with a change in brushing sound
and motion. This is your signal to start brushing
the upper front teeth for 15 seconds.
3
At the next beep and pause, move to the
bottom front teeth for the final 15 seconds
of brushing.
Massage mode
Mode for gentle gum stimulation.
Advertisement
Table of Contents
