Horizon Fitness PS-P61 Instruction Manual page 43

5-1 Installation Instructions
3.
Remove two rubber mounts with allen
wrench and install two plastic mounts at
the same position. The plastic mounts is
fixed with the fix screws of rubber
mounts.
NOTE
Install the operation side of two plastic
mounts into the inside of holes.
4.
Install collator on PS-P61 so that plastic
mounts are placed into dents of PS-P61.
5.
Remove two fix plates. (4 fix screws
each.)
6.
Open rear cover.
Plastic Mounts
Install plastic mount
inside of hole.
Rubber Mounts
Install plastic mount
inside of hole.
Plastic
Mounts
5. Installation Instructions
Fix Screw
Fix Plates
Rear Cover
(37)