Table of Contents
Advertisement
3. Troubleshooting
3-1 When Monitor Lamp Illuminates / Flashes and Machine Stops
3-1-3 When Punch Trouble Lamp Flashes
[Cause]
Punch unit is locked.
[Remedy]
1.
Turn off power switch of collator , then
turn on again after a few seconds.
2.
Press eject button. Punch unit is
reset.
3.
Open staple cabinet.
4.
Remove jammed sheets.
5.
Close staple cabinet.
(22)
01PSP61A22
Staple Cabinet
Advertisement
Table of Contents
