Table of Contents
Advertisement
3-1 When Monitor Lamp Illuminates / Flashes and Machine Stops
3-1-4 When No Staple/Staple Trouble Lamp Illuminates
[Cause]
Out of staples.
[Remedy]
Refill staples.
See "4-2 How to Refill Staples" (page 32).
3-1-5 When No Staple / Staple Trouble Lamp Flashes
[Cause]
Staple unit is locked because of staple jam.
[Remedy]
1.
Turn off power switch of collator.
2.
Open staple cabinet.
3.
Remove jammed sheets.
4.
Remove jammed staples referring to
"4-1 How to Remove Jammed
Staples"(page 30).
5.
Close staple cabinet.
6.
Turn on power switch of collator.
7.
Depress eject button, and staple unit is
reset.
8.
Check for proper stapling by collating
several sets (7 to 8 sets).
3. Troubleshooting
Staple Cabinet
(23)
Advertisement
Table of Contents
