Black Box MC170A User Manual page 18

d. Change Password—This allows you to change the
password. If you select this, you will be asked to
enter the new password twice. If you enter the
password incorrectly the second time, the
password will not be changed. The password
will always be shown as a group of asterisks (*).
e. Run LanSafe—This will run the Reconnect
program to test the comport, modem, and
Firewall connections.
f. Default—This resets the Firewall to the default
settings.
3. Once the settings are correct, select Exit. This
will save the configuration in an encrypted file
(LanSafe.cfg) in the LanSafe directory.
If the configuration file becomes corrupted or the you forget
the login or password, erase the configuration file
(LanSafe.cfg). This will cause the LanSafe Config to use
the default settings.
4. To reconnect the Firewall, run the LanSafe
program.
LAN-SAFE FIREWALL
NOTE
17