Windows 3.X - Black Box MC170A User Manual

LAN-SAFE FIREWALL

4.1 Windows 3.x

Follow these steps if you're using Windows 3.x.
1. Insert disk 1 into drive A (or B).
2. Select "File" from the Program Manager.
3. Select "Run."
4. Type in the Command Line:
"A:\SETUP.EXE" or "B:\SETUP.EXE"
and select "OK."
5. When asked, place disk 2 into drive A (or B)
and select "OK."
6. Follow the rest of the instructions given
by the Setup program.
7. Once the program has finished installing,
open the LanSafe Program Group.
8. Double click the LanSafe Config.
9. Go to Chapter 5.
14