PIAGGIO MP3 500 ie SPORT Business LT (2011) User Manual page 286

Suspensions
With the interface wiring connected to the control
unit, secure the vehicle on its centre stand and
switch to "ON". Select the reading scale on 20 V.
Insert the multimeter probes on pins 17 and 25.
Check that the voltage in the activated locking
condition is 4V and 1V in the locking rest condition.
With the interface wiring disconnected from the
control unit, check the continuity between pin 17
and the yellow cable of the potentiometer connec-
tor, between pin 25 and the green-blue cable,
between pin 11 and the orange-blue cable. Also
check that these lines are insulated from each oth-
er and ground.
SENSORE PRESENZA PILOTA
SUSP - 286
MP3 500 ie SPORT Business LT (2011)