Setting The Timer; Convenience Operation; I Powerful Mode Operation; I Quiet Mode Operation - Panasonic CS-E12CKP Operating Instructions Manual

AUTO
FAN
8
MODE QUIET
7
AIR SWING
1 2
1
ON
5
OFF
TIMER
CHECK RESET CLOCK

SETTING THE TIMER

Ensure that the current time is correct before setting the
timer. The timer cannot be set if the time display is
flashing.
I ON-TIMER Operation
To start the air conditioner operation automatically.
• Press 1 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4.
I OFF-TIMER Operation
To stop the air conditioner operation automatically.
• Press 5 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4.
G Timer Mode Operation Details
• When the ON-Timer is set, operation will start
before the actual set time. This is to allow the room
temperature to reach the setting temperature by the
setting time. (Maximum of 35 minutes in advance).
• Once the timer is set, operation will start and stop
at the same time everyday.
• The current time is not displayed when the timers
are set.
• When both timers are used together, the TIMER
mode indicator on the indoor unit remains lit even
when the operation is stopped by the OFF-TIMER.
7

CONVENIENCE OPERATION

OFF/ON

I Powerful Mode Operation

To obtain the set temperature quickly.
POWERFUL
6 • Used in winter to warm yourself quickly upon
returning home (Heating + Powerful).
FAN SPEED
• Used in summer to cool yourself after a hot bath
3
(Cooling + Powerful).
3
SET
• Press 6.
4
* Powerful mode indicator (orange) on the indoor
CANCEL
2
• To cancel this operation, press once more.
G Note
• The setting temperature and the fan speed changes
automatically in order to heat, cool or dehumidify the
room quickly.
Automatic
unit will light up.
Operation Temperature
HEAT
3.5°C higher
2°C lower (For
COOL
first 20 minutes)
1°C lower (For
DRY
first 20 minutes)

I Quiet Mode Operation

To provide quiet operation.
• Press 7.
* Quiet mode indicator on the indoor unit will light
up.
• To cancel this operation, press once more.
G Operation Details
• Air flow sound will reduce during operation.

I Ionizer Mode Operation

Produce negative ion for fresh air.
• Press 8.
* Ion mode indicator on the indoor unit will light up.
• To cancel this operation, press once more.
G Operation Details
• Air conditioner ON:
Fan Speed
Provide negative ion during operation.
• Air conditioner OFF:
Provide negative ion with FAN operation.
• If blinking, press 8 twice.
If still blinking, please call service.
Slightly
Stronger