Customizing Your Nº383; Setup Overview; The Menu System - Mark Levinson 383 Owner's Manual

setup overview

28

the menu system

Customizing Your Nº383
The Nº383 Integrated Amplifier has many provisions for custom-
tailoring the system's operation to match your preferences. The method
for modifying any of these settings is to:
• press the button on either the front panel or the re-
setup
mote control to enter the setup mode, accessing the
Nº383's menu system;
• navigate among different menu items using the
or the remote control's
knob
• change the value of the selected menu item using either
the
volume knob
• move down a level within a menu, or save the change by
pressing on either the front panel or the remote
enter
control. (You can avoid saving an unwanted change by leav-
ing the menu without pressing
stead. Within the menu system,
button.)
This four-step process gives you extensive control over a wide variety of
setup options, and provides positive feedback that your changes have
been accepted and saved for future use.
The complete Nº383 Setup menu is shown below for your reference:
No383 Setup
Set Inputs
Set Input 1
Name=INPUT 1
Gain= +6 dB
Offset= 0.0
Rec.Out=NONE
Set Input 2
Set Input 3
Set Input 4
Set Input 5
Teach IR
Mute = -20.0
MaxVol= 80.0
Trig.= 12v,L
Sw 1.05 1.02 (the software version numbers)
select buttons
or buttons on the remote.
volume +/–
, by pressing
enter
acts like a "cancel"
setup
(repeats previous menu)
(repeats previous menu, with +12 dB gain)
(repeats previous menu)
(repeats previous menu)
select
;
in-
setup