NEC LT260K User Manual page 30

Hide thumbs Also See for LT260K:

Table of Contents

Available languages

INSTALLATION AND CONNECTIONS

Connecting your PC or Macintosh computer to your projector will enable

you to project your computer's screen image for an impressive presenta-

To connect to a PC or Macintosh, simply:

1. Turn off the power to your projector and computer.

2. Use the supplied signal cable to connect your PC or Macintosh to the

3. Turn on the projector and the computer.

4. If the projector goes blank after a period of inactivity, it may be caused

by a screen saver installed on the computer you've connected to the pro-

NOTE: The LT260K/LT240K is not compatible with video decoded outputs of

NEC ISS-6020 and ISS-6010.

Making Connections