Setting The Controls - Hotpoint WLW4700B How To Get The Best

The laundry process cm tiuce
the flame retardanq of fabrics. To
avoid such a result, the garment
manufacturer's care instructions
should be followed very carefilly.
How to operate your clothes washer
read the IMPORTANT SAFETY INSTRU~IONS
Sorting and hading
Sort clothes carefilly by fabric
weight, color and amount of
type,
S-oil. See instructions on page 11.
Load clothes into the wash basket
being careful not to overload.
Add measured detergent to wash
load.
See page 8 for Bleach Dispenser
and Fabric Softener Dispenser
instructions.
Refer to pages 11 to 17 for more
information on loading clothes,
detergents, and other laundry
products.
Close lid. Washer will fill but not
agitate or spin with lid open.
For washer o~ration
. m not leave washer lid up
during cycle. This will stop the
wash and spin action and prevent
completion of the cycle.
before operating this appliance.
MultiSpeed Uoshet

Setting the controls.

See the Controls Setting Guide on
LOW: Washer is less than 1/3 full
of clothes.
VANABLE: Any level of fill
between Low and Full.
FULL: Washer is more than 2/3
full of clothes.
RESET: To increase level, turn
knob to "RESET" and then to
new level.
4
Select Wash/Spin Speed.
and turn clockwise to your selected
wash setting.
to start the washer. If you wish to
change setting after washer has
started, push Cycle Selector Knob
into stop the washer and reset to
the new position. Setting can be
changed at any time.