Hotpoint WLW4700B How To Get The Best page 24

The Problem Solver
PROBLEM
SNAGS, HOLES,
TEARS, WPS
WEAR
(continued)
WASHER WON'T
OPERATE
WATER
TEMPERATURE
IS INCORRE~
(continued)
I
normal due to w~ening of fibers bythe Permanent Press process. It is not caused by
washer. You can slow this process by wasting smd Permanent Press loads with a Fd
Water tiel. Do not wash heavy items such as towels with Perrnauent Press. Remove
collar stays, when possible.
. Roughness or bws on agitator may cauw rips or a. Check agitator and file rough
spots if n=essary.
* Maybe caused by use of Normd4Fast Wash/Spin speed far delimte articles. Use
by washer. Slow pmess by washing on GentldSlow WA/Spin s@.
Too large loads, or too Bt$le wakr. Load washer ody with number of items that WM
move freely. Select correct nter level.
I
Pretreat with liquid demrgent.
Make sure both hot and cold faucets are turned on.
* Make sure lid is closed. Washer will fill but will not spin or agitate with lid open.
outlet, remove it. Washer should have separate outlet.
Make sure temperature selector controls are
properly set.
Make sure hot and cold faucets are turned on
and regulated correctly.
Make sure hoses are connected to correct
faucets.. hot to hot, cold to cold.
. Water valve screens may be stopped up. Remove inlet hoses from
water valve. Clean the screens and reinstil hoses.
Check household water heater to make sure it is delivering water at 140° to 150°F.
24
o %