Setting The Controls - Hotpoint WLW5700R Use And Care Manual

Sorting and Loading
See How to Use Bleach
Dispenser section for
information on the
Bleach Dispenser.

Setting the Controls

Use the Controls Setting Guide to help you make the proper selections.
Cottons Colofiast
Cottons Noncolofiast
Washable Woolens
*"Warm" water is approximately 90°E to IIO"E (hand comfortable).
Select Water Level.
LOW: Washer is less than 1/3
full of clothes.
MEDIUM: Between 1/3 and
HIGH: Washer is more than
regular loads. See How to
Use the Handwash System.
If you wish to increase water
level after you've made a
selection, turn knob to "reset"
and select new level.
Turning control to YES will
provide a second deep rinse
with Light, Medium and
Heavy Soil cycles. If no Extra
Rinse is desired, turn control
to NO.
(continued)
See How to Use Fabric
Softener Dispenser section
for more information on the
Fabric Softener Dispenser.
Automatically Programmed
Wash Spin
Speed
Speed
Normal Normal
Normal
Gentle Gentle
Normal
Gentle
Select Options.
Use this control if you wish to
change the water temperatures
that are automatically
programmed by the Fabric
Care Programs control.
NORMAL–Leaves the
temperatures as programmed.
COLD WASH–Provides cold
wash and rinse water in all
cycles.
WARM RINSE —Leaves the
wash temperature as
programmed but provides
warm rinse water in
SUPERCYCLE, Heavy Soil,
Normal and Light Cycles.
To minimize the setting of
wrinkles, cold rinse is
automatically provided
in Permanent Press,
RAPID WASH cycles.
Wash Rinse
Temp.
Temp.
Hot Cold
*warm
Cold
*warm
Cold
*warm
Cold
For information on bleaches
and fabric softeners, see Other
Laundry Products section.
Close the lid. Washer will fill
but not agitate or spin with the
lid open.
and turn clockwise to your
selected wash setting.
START
t \
STOP @
start the washer. If you wish to
change setting after washer has
started, push Cycle Selector
knob into stop the washer and
reset to the new position. Setting
can be changed at any time.
,
5