Advertisement
Audiolab 8000AP – Pre-Amplifier
6.
Post DAC Phase Linear active filters.
Phase linear active filters are utilised after the D-A conversion, using components chosen for their
excellent sonic characteristics. This moves DAC noise outside the audible spectrum, lowering the
noise floor significantly and optimises the analogue output prior to amplification.
7.
CODEC (SPDIF receiver, Stereo A/D, 8 Channel DAC)
The 8000AP uses a high quality 8 channel CODEC which includes the following features and
performance.
•
A/D converters: 24Bit / 48kHz
•
D/A converters: 24Bit / 192kHz
•
S/PDIF receiver
•
8 Channel SPDIF input multiplexer
•
Differential analogue architecture
•
-100 dB THD+N
8.
Microprocessor
A powerful microprocessor ensures all the component parts of the 8000AP work together seamlessly.
9.
DSP
The 8000AP uses a "Dual" DSP which integrates a multi-channel audio decoder and a 32-bit audio
processor with an audio optimised software framework. This allows the 8000AP to decode all of the
popular processing modes listed below.
Digital Inputs
Analogue Input
5.1 Analogue Bypaass
input
Analogue Outputs
Video Outputs
Power Supply
Finish
SPECIFICATIONS
Frequency Response
Distortion (THD+N)
Dynamic Range
Input sensitivity
Frequency Response
Distortion (THD+N)
Dynamic Range
Input sensitivity
Frequency Response
Distortion (THD+N)
Dynamic Range
Output level
Volume control
HDMI
OSD
Mains voltage :
Power consumption :
Dimensions (WxHxD -
mm)
Colour
10Hz - 20KHz (+0.2dB), 5Hz - 75KHz (+3dB)
less than 0.002%
greater than 103dB
0dBu (775mV/), Max 3.5V (2)
10Hz - 20KHz (+0.2dB), 5Hz - 24KHz (+3dB)
greater than 0.003%
less than 100dB @ 1kHz
0dBu (775mV), Max 3.5V (2)
10Hz - 20KHz (+0.2dB), 5Hz - 100KHz (+3dB)
less thean 0.001%
greater than 110dB
0dBu (775mV), MAX 3.5V
-90dB to +15dB in 1dB steps, Channel C19imbalance
<+0.1dB
Max resolution 1080p, HDCP compatible, 'Type A'
Connectors
1.5Vp-p, 75ohm, PAL or NTSC
230VAC +/- 10%
15W , (< 7W in Standby)
445 x 74 x 338
Black / Silver
4
Advertisement
