General Information; Diagnosis; Disassembly - Pioneer CDX-MG6047ZH Service Manual

1

7. GENERAL INFORMATION

7.1 DIAGNOSIS

7.1.1 DISASSEMBLY

A
- Removing the upper case (not shown)
1. Remove the five screws, then remove the upper
case.
- Removing the Extension Unit (Fig. 1)
B 1. Remove the three screws B, then remove the side
frame and holder.
2. Remove screw C, screw D and PCB from the con-
nector.
3. Straighten the three currently bent claws, then
remove the extension unit.
- Removing the Grille Assy (Fig. 1)
1. Remove the two screws A and the connector, then
remove the grille assy.
C
- Removing the CD Mechanism Module (Fig. 2)
1. Remove the three screws A, then remove the front
frame.
2. Remove the three screws B and two screws C, then
remove the damper and holder.
3. Remove the two spring A s, spring B and spring
C from the hook, then remove the CD mechanism
module.
D
– Precautions on Assembly –
Apply spring C (black) to the front
side hook.
Remaining springs A and B are to be
hung on the center hook.
- Removing the Keyboard PCB (Fig. 3)
E
1. Remove screws A and B, then remove the switch
PCB.
2. Remove the four screws C, then remove the guide.
3. Remove the four screws B and screw A, then remove
the keyboard PCB.
F
58
1
2
CDX-MG6047ZH/UC
2
3
3
4
Fig. 1
Fig. 2
Fig. 3
4