Panasonic EY4550 Service Manual page 6

Procedure 1A → 1B → 1C
Ref. No. 1C
Procedure 1A → 1B → 1C → 1D
Ref. No. 1D
Removal of the housing.
1. Loosen 1 housing screw (2.9X16).
2. Loosen 9 housing screw (4X16).
3. Hold the housing A and take the housing B up vertically.
Removal of driving assembly.
1. Take out the driving assembly together with the switch assembly.
2. Loosen 4 screws to disassemble the motor assembly.
(for reassembly)
If the fan baffle is pulled out;
NOTE:
Make sure to attach the fan baffle otherwise the pendulum pin may
not work.
NOTE:
Make sure to attach the hexagon nut on the rear side of fan baffle.
6