Fire Alarm Test - Fireco Deafgard Operating Manual

Fire Alarm Test

1. Place Deafgard where it is to be used,
i.e. on the bedside table. Place the
Pillow Pad under the pillow.
2. Sound the fire alarm for a minimum of
30 seconds.
3. Deafgard will activate within 20
seconds of the fire alarm sounding.
4. Deafgard will remain in a fire alarm
condition until the fire alarm ceases.
5. Should Deafgard not respond to your
fire alarm, it may be that your alarm
is too quiet. See Sensitivity
Adjustment or contact the Technical
Advice line.
Note: When Deafgard activates
'FIRE' will be displayed on the
LCD, the Strobe LEDs on the top of
the unit will flash and the Pillow
Pad will vibrate.
The Deafgard unit should be
placed next to the bed during use
with the Pillow Pad under the
pillow
.
10