Kodak EasyShare M1073 IS Extended User Manual page 45

Hide thumbs Also See for EasyShare M1073 IS:

Table of Contents

Printing from an EasyShare all-in-one printer

1 Turn on the printer. Turn on the camera.

The PictBridge logo is displayed, followed by the current picture and menu. (If no

pictures are found, a message is displayed.) If the menu interface turns off, press any

button to redisplay it.

2 Highlight a printing option, then press OK.

Current Picture—

Tagged Pictures—

printing and choose a print size.

Index Print—

sheets of paper.) If the printer is capable, choose a print size.

All Pictures—

Choose the number of copies.

Image Storage—

NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer

pictures to your computer, see

Disconnecting the camera from an EasyShare all-in-one printer

1 Turn off the camera and printer.

2 Disconnect the USB cable from the camera and the printer.

Using a printer that is not PictBridge enabled

For details on printing pictures from your computer, click the Help button in EasyShare

software.

www.kodak.com/go/support

Downloaded From camera-usermanual.com Kodak Manuals

Press

to choose a picture. Choose the number of copies.

If your printer is capable, print pictures that you tagged for

Print thumbnails of all pictures. (This option requires one or more

Print all pictures in internal memory, on a card, or in Favorites.

Access Internal/Card or Favorites.

page

37. In Favorites mode, the current favorite picture is displayed.

Transferring, printing, tagging

Table of Contents