Pairing And Establishing Connection With Computer - iPazzPort KP-810-10BTT User Manual

1. Pairing and establishing connection with computor.
Windows XP/2000
Let's take Microsoft Bluetooth Software as an example to describe Bluetooth Search,Pairing and
Connection, other Bluetooth software please refer to its own user manual.
1.1 Insert Bluetooth adaptor into any vacant USB port on your computor, please be patient to wait
system search and install new hard driver. Then bluetooth icon will appear on the taskbar.
If your computing device has integrated bluetooth receiver refer to the user manual to enable
that receiver
1.2 Turn on unit by moving the power switch to ON, (see arrow 10), press key BLUETOOTH RESET
indicated by arrow 4 till LED3 blink then release it(about 2-5 seconds) , that means your unit is
ready and searching other Bluetooth device for pairing.
Bluetooth Reset
LED3
Note: during operation, do not press this key, or your bluetooth keyboard will
be disconnected from your computor
1, 3 Click "Start", "Control Panel" (make sure you're in Classic View), and then double-click
Bluetooth Devices. Select "Add".
1.4, In the Add Bluetooth Device Wizard, select the "My device is set up and ready to be found
check box", and then click "Next".
1.5, After icon of "Bluetooth Keyboard" appear, click "Bluetooth Keyboard", and then click "Next".
Bluetooth Keyboard
New Device
Bluetooth icon