Instrument Marking; Primary Tso Label - JPI EDM-900 Installation Manual

FAA Approved Installation Manual for the
EDM-900 and EDM-930
Primary Engine Data Management System

2. Instrument Marking

The TSO label on the instrument is marked as to the instrument configuration.
The part number of the instrument is as follows:
Model designation system by part number for EDM-900/930
Model Number / Part Number
EDM-900 PN 790000-A- [XXX]
EDM-930 PN 790000-C- [XXX]
INSTRUMENTS THAT CAN BE PRIMARY IF IN POH
CHT FUEL
4-9 FLOW
OIL FUEL
TEMP PRESS
OIL RPM
PRESS
MAP
Example PN 790000-(X)-(XXX) (X) denotes EDM-900 or EDM-930, (XXX) denotes Part Number for a specific
aircraft with or without and engine STC. Each PN is specific to a Make and Model Aircraft with or without
STC. In which the information is gathered from the Aircraft POH or STC Data sheet.
Aircraft type
w/engine STC No. if
applicable
Cessna 182-P
Cessna 182-P, STC12345NW

3. Primary TSO Label

TFT (liquid crystal) Type Display
TFT (liquid crystal) Type Display
RAD
Alert Light
TIT
CDT
FUEL
Quantity
JPI assigned Data Base Part No. per
Limits found in the POH or engine STC
for a specific aircraft
Description
NON-PRIMARY INSTRUMENTS
EGT Time to
4-9 empty
OAT Required
CARB to WP
Volts Reserve at
Amps
IAT
534
875
Report No 908
Page 4 of 55 Rev I
Date 1-18-2013
Fuel Remaining
Fule USED
Shock Cooling
Differential EGT
WP Normalize
MPG Percent of HP
Part No. Displayed on 930
RAD at Start-up or 900
message area
790000-X-534
790000-X-875