JPI EDM-900 Installation Manual page 2

FAA Approved Installation Manual for the
EDM-900 and EDM-930
Primary Engine Data Management System
47. Programming Accumulate Trip Total _______________________________________________________________ 37
48. Trouble Shooting _______________________________________________________________________________ 38
Connector Pin Assignments on EDM, J1 through J5 _______________________________________________ 40
49.
50. Connector Pin Assignments on EDM, J1 through J5 ___________________________________________________ 41
51. J3 RPM, MP, Oil-P_____________________________________________________________________________ 44
52. Appendix A Fuel Flow install Report 503 ___________________________________________________________ 48
53. Appendix B ICA _______________________________________________________________________________ 48
54. Appendix C Connector Pin Assignments on EDM, J1-J2 Only with ARINC 429 _____________________________ 49
The Owner of the EDM-900/930 must keep this manual
J.P. INSTRUMENTS
PO BOX 7033
HUNTINGTON BEACH CA
Report No 908
Page 2 of 55 Rev I
Date 1-18-2013
Last printed 1/24/2013 4:14:00 PM