Power On Your Tablet - Alcatel POP 7 LTE User Manual

2. Use only micro SIM type card. Using a nano SIM with adapter may
damage the tablet or the card may become stuck in the device.
Charging the battery
To charge your tablet, connect the charger to your tablet and mains
socket.
• When using your tablet for the first time, charge the battery fully
(approximately 5 hours).
You are advised to fully charge the battery. Charging status (
indicated by the percentage on screen. The percentage increases as
the tablet is charged.
To reduce power consumption and energy waste, when battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications
when not in use; reduce the backlight time, etc.
1.2.2

Power on your tablet

Hold down the Power key until the tablet powers on, unlock your
tablet (Swipe, PIN, Password, Pattern) if necessary and confirm. The
Home screen is displayed.
If you do not know your PIN code or if you
have forgotten it, contact your network
operator. Do not leave your PIN code with
your tablet. Store this information in a safe
place when not in use.
Set up your tablet for the first time
The first time you power on the tablet, you should set the following
options:
• Touch to display the all languages list, slide up and down to select
the tablet's language, then touch
• Insert SIM card or touch SKIP to continue.
• Select a Wi-Fi to connect or touch SKIP to continue.
to continue.
24
) is