Alcatel POP 7 LTE User Manual page 12

For this device, the highest reported SAR value for usage near
the body is:
Maximum SAR for this model and conditions under which it was
9015B (Body)
SAR compliance for body operation is based on a separation
distance of 0.9 cm between the device and the human body.
During use, the actual SAR values for this device are usually well
below the values stated above. This is because, for purposes of
system efficiency and to minimize interference on the network,
the operating power of your device is automatically decreased
when full power is not needed. The lower the power output of the
device, the lower its SAR value.
Body SAR testing has been carried out at a separation distance
of 0.9 cm. To meet RF exposure guidelines during body-worn
operation, the device should be positioned at least this distance
away from the body.
If you are not using an approved accessory ensure that whatever
product is used is free of any metal and that it positions the device
the indicated distance away from the body.
Organizations such as the World Health Organization and the US
Food and Drug Administration have suggested that if people are
concerned and want to reduce their exposure they could use a
hands-free accessory to keep the wireless device away from the
head or body during use, or reduce the amount of time spent on
the device
• ISEDC Notice
This device complies with Innovation, Science and Economic
Development Canada (ISEDC) license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
IC: 9238A-0067
recorded:
1.36 W/kg
12