Wi-Fi - Marantz M-CR611U Owner's Manual

Contents Connections

Wi-Fi

You can stop the Wi-Fi function when connecting this unit to the network
using Wired LAN.
Enabled
The Wi-Fi function is used.
(Default):
Disabled: The Wi-Fi function is stopped.
Bluetooth
You can stop the Bluetooth function.
Enabled
The Bluetooth function is used.
(Default):
Disabled: The Bluetooth function is stopped.
Front/Top
Rear panel
panel
Playback Settings
Settings
You can make detailed settings for the network.
To change the network environment, perform "Quick Setup". (For details
on the operations, see the separate "Quick Setup Guide".)
If you are using a broadband router (DHCP function), there is no need to
0
make the settings at "IP Address" and "Proxy", since the DHCP function
is set to "On" in this unit's default settings.
Only set "Settings" when connecting to a network without a DHCP
0
function.
o Wired Setup
n DHCP
Selects how to connect to the network.
On
(Default):
Off:
Remote control 109
unit
Tips
Configure the network settings
automatically from your router.
Configure the network settings manually.
Index
Appendix