Twin-Star International 23CM100 Assembly Instructions Manual page 6

Electric
Fireplace Insert
E-5
Mantel/Top
G
M
L
Completed
Assembly
Completed
Unit
Install
Insert
Fron Back
11. Locate Mantel/Top (G) and lay
finished side up on top of completed
assembly. From the inside, attach
the Mantel using Bolt (L) and Washer
(M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
12. Using Phillips head screwdriver tight-
en all Bolts alternating top and bottom,
left and right.
13. Remove the two mounting brackets at-
tached to the back of the Left and Right
Front panels. Set aside with the wood
screws.
Please read ALL "Electric Fireplace
Insert" instructions prior to installing
Electric Insert in your completed Fire-
place Mantel. Install the insert in your
fireplace close to its final position.
Move your completed unit only short
distances. Move completed unit with
great care. It takes two people to move
completed unit into its position.
14. Lift insert carefully into the back
of the unit and center in the insert
opening. Do not drag insert across
Base/Hearth as it may scratch
your unit.
15. Install the mounting brackets to hold
insert flush against the inside of the
mantel.