Philips HTS3538 User Manual page 21

Sound
No sound from home theatre speakers.
•
Connect the audio cable from your home
theatre to your TV or other devices (see
'Connect audio from TV and other devices'
on page 8 ) .
•
Reset your home theatre to its factory
settings (see 'Restore default settings' on
page 15 ) , then switch it off and switch on
again.
On your home theatre, press SOURCE
•
repeatedly to select the correct audio input.
Distorted sound or echo.
•
If you play audio from the TV through the
home theatre, make sure that the TV is
muted.
Audio and video are not synchronised.
1) Press and hold AUDIO SYNC . 2) Press
•
the +/- or Navigation buttons within 5
seconds to synchronise the audio with the
video.
Play
Cannot play a disc.
•
Clean the disc.
•
Make sure that the home theatre supports
the type of disc (see 'Media formats' on page
17 ) .
•
Make sure that the home theatre supports
the region code of the disc .
•
If the disc is a DVD±RW or DVD±R disc,
make sure that it is fi nalised.
Cannot play a DivX f le.
•
Make sure that the DivX fi le is encoded
according to the 'Home Theatre Profi le' with
the DivX encoder.
•
Make sure that the DivX fi le is complete.
DivX subtitles do not display correctly.
•
Make sure that the subtitle fi le name is the
same as the movie fi le name (see 'Subtitles'
on page 10 ) .
•
Select the correct character set (see
'Subtitles' on page 10 ) .
Cannot read the contents of a USB storage
device.
•
Make sure that the format of the USB
storage device is compatible with the home
theatre.
•
Make sure that the fi le system on the USB
storage device is supported by the home
theatre.
'No entry' or 'x' sign appears on the TV.
•
The operation is not possible.
EasyLink does not work.
•
Make sure that the home theatre is
connected to a Philips brand EasyLink TV, and
the EasyLink option is turned on (see 'Set up
EasyLink (HDMI-CEC control)' on page 8 ) .
When you switch on the TV, the home theatre
automatically switches on.
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theatre work independently, switch off
EasyLink.
EN
19