Connect Audio From Tv And Other Devices; Set Up Speakers; Set Up Easylink (Hdmi-Cec Control) - Philips HTS3538 User Manual

Connect audio from TV and
other devices
Play audio from TV or other devices through your
home theatre speakers.
Use the best quality connection available on your
TV, home theatre, and other devices.
Note
•
The audio connections in this user manual
are only recommendations. You can use other
connections too.
.
Option 1: Connect audio through a digital
optical cable
Best quality audio
1
Using an optical cable, connect the OPTICAL
connector on your home theatre to the
OPTICAL OUT connector on the TV or
other device.
•
The digital optical connector might be
labelled SPDIF or SPDIF OUT .
EN
8
Option 2: Connect audio through
analogue audio cables
TV
Basic quality audio
1

Set up speakers

Set up the speakers manually to experience
customised surround sound.
Before you start
Make the necessary connections described in the
quick start guide, and then switch the TV to the
correct source for your home theatre.
1
2
3
TV
Set up EasyLink (HDMI-CEC
control)
This home theatre supports Philips EasyLink,
which uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
Using an analogue cable, connect the AUX
connectors on your home theatre to the
AUDIO OUT connectors on the TV or other
device.
SETUP on your home theatre
Press
remote control.
Select [Audio Setup] and then press OK .
Press the Navigation buttons and OK to
select and change:
[Speakers Volume] : Set the volume level
•
of each speaker.
[Speakers Delay] : Set the delay time for
•
speakers which are placed closer to the
seating position in order to obtain equal
audio transmission from all the speakers.
VCR