CAT5 wiring from Pace4/8/16PRM to any non-PoE device. 1. Pace4/8/16PRM installation: a. Pace4PRM - Affix rubber pads to Pace4PRM for shelf installation (Fig. 5, pg. 6). Pace8/16PRM - Attach mounting brackets to Pace8/16PRM unit for rack installation (Fig. 4, pg. 6).
Page 3
2. Pace1PTM installation: a. Secure unit to desired mounting surface with a proper fastening device utilizing the case’s mounting hole. Unit should be mounted in proximity of camera/device. b. Connect structured cable from IP camera/device to RJ45 jack marked [PoE Out] (Fig. 2, pg. 3). c.
Page 4
Multiple PoE Camera Connection: Pace8PRM shown. Pace16PRM is similar, with twice as many channels. Fig. 3 PoE compliant Pace1PTM 450m max. 100m max. PoE Camera PoE compliant Pace1PTM 450m max. 100m max. PoE Camera PoE compliant Pace1PTM 450m max. 100m) max. PoE Camera PoE compliant Pace1PTM...
Mounting Options: Rack Mount Installation 1- Remove and discard factory installed screws from both sides of rack chassis (Fig. 4a). 2- Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B) (included) (Fig. 4b). 3- Place unit into desired EIA 19”...
Enclosure Dimensions (H x W x D approximate) 1.7” x 5.25” x 8.42” (43.8mm x 133.35mm x 213.9mm) Pace4PRM 5.25” 133.35mm 8.42” 213.9mm 1.7” Ports 43.8mm Pace4/8/16PRM - 7 -...
Page 8
Enclosure Dimensions (H x W x D approximate) 1.625” x 19.125” x 8.5” (42mm x 486mm x 216mm) Pace16PRM shown. Pace8PRM is similar. 1.625" Ports Ports Ports Ports 42mm 19.125" 486mm 0.75" 19.05mm 17.625" 447.7mm 8.5" 216mm Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 website: www.altronix.com, e-mail: info@altronix.com.