Battery Installation; Effective Range Of The Remote - Palsonic 5140TS Owner's Manual

Battery Installation

Please install the batteries before using
the remote control.
1
2
3
Notes:
1. When the remote control will not be used for a
long period of time or when the batteries are
worn out, remove the batteries.
2. Do not drop or dampen the remote control.
3. Do not disassemble the remote control.
Open the battery
cover.
Install two "AA"
batteries matching the
+/- polarities of the
battery to the +/- marks
inside the battery
compartment.
Replace the battery
cover.
Effective range of the remote control
Notes:
1. There should be no obstacle between the TV
and the transmitter.
2. Use the remote control within the effective range
as the above figure.
3. If the remote control does not work, please check
whether the batteries are exhausted or the
polarity is wrong.
4. When direct sunlight, and incandescent lamp,
fluorescent lamp or any other strong light shines
on the remote sensor of the TV, the remote
operation may be unstable.
7
5m