Palsonic 3499G Owner's Manual page 23

3
1
HELP
1
3
Setting ON timer
Please enter the Clock menu and
select TimeOn item.
Press VOL+ or VOL- button to set ON
Time.
After you finish setting Time On item,
press the STANDBY
remote control. Then the TV set auto
turns on when your preset time elapses.
Notes:
The Alarm Channel item is available only after you finish setting Time On
item.
2
Setting alarm channel
Please enter the Clock menu and
select Alarm item.
Press VOL+ or VOL- button to select
channel number.
When the preset ON time elapses, the
set auto turns on and goes to the
channel set on the Alarm item.
!
Notes:
1. When you adjust time by VOL+ or VOL- button, the increasing/
decreasing step of time is 1 minute in every press. If you press and
2
hold the button for more than 1 second, the step of time is 1 hour.
2. Once the functions of Time On or Time Off fulfil, you need to set
the On Time or Off Time again if you want to use this function next
2
time.
3. After you finish setting Time Off item, if the set auto goes to
3
STANDBY because there is no signal input for a continuous 15
minutes, or if you turn off manually, then the preset Off Time will be
cancelled. As the same way, turn on the set in advance will cancel
the Time On and Alarm Channel settings.
Once you turn off the set by press the Power Switch, all settings
4.
in the Clock menu page will be cancelled in next time's turning on.
button on the
21
Clock
Sleep 60
Timer 10 : 00
TimeOff 22 : 00
TimeOn 18 : 00
Alarm Channel - -
Clock
Sleep 60
Timer 10 : 00
TimeOff 22 : 00
TimeOn 18 : 00
Alarm Channel 99