Turning The Power On/Off - Palsonic 3499P Owner's Manual

OPERATION

Turning the Power On/Off

.
The following describes how to turn the TV on/off using the TV's main switch and the remote
controller.
To turn the power on/off
1. Press the POWER switch, the red power indicator lights up.
2.
If no picture appears on the screen, press the
the remote controller to turn the set on.
Without using the remote controller, you can directly press VOL
TV/AV button on the set to turn on the TV.
*Note:
If there are no input signals to the TV when the TV set is on, a blue background will
appear on the screen (when B.B (blue back) is set ON.)
After 15 minutes if there are still no signals to the TV, it will enter into standby mode
automatically
3. Press the POWER switch to turn off the set completely.
4. If you want to turn off the TV temporarily, press the
switch the set to standby mode.
Special indication:
Last-Mode-Memory: after turning off the power, the last TV mode, picture and sound setting
mode and preset channels all are memorised. Therefore, next time you turn on the TV, the TV will
work in the previous setting mode.
.
If you directly pressed the main power switch on the TV to turn it off, you must press the
main power switch to turn on the TV.
.
If you pressed the main power switch to turn off the TV when in standby mode, press the
main power switch and then operate from the remote controller to turn the TV on.
Auto-Power-Off function: there are two kinds of Auto-Power-Off function:
1.
If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically
turn off after about 15 minutes.
2. Sleep-timer function. However, if the Sleep-timer is operating, it takes precedence, that is,
the function of Auto-Power-Off, if no signals received will be ineffective.
button or any one of 0~9 number buttons on
or CH
button on the remote controller to
6
or