Advertisement
___________________________________________________________________________
Completion of "Quick Installation Guide"
Kindly visit
http://www.wifiabc.com
and click on Knowledge Base for a complete
guide and tutorials on the Captive Portal Ready Devices, such as changing SSIDs,
adding or changing passphrase, blocking guest to Local Area Networks and VLANs
configuration.
Quick Troubleshooting notes:
"HotspotAABBCC@123.456.7.8"
Cannot see the SSID
Make sure the device is properly connected to your Local Area Network or Internet router which
has access to the internet. If connecting additional devices by wireless mesh to the first device, try
not to exceed 10 meters during initial setup. After setup, you can relocate it further. To restart initial
setup, power up device for at least 1 minute, then press-holding the reset button for 12 seconds
before releasing with a pointed object. You can verify the device's response from the LED lights.
"My Private-AABBCC" or "HotspotAABBCC@123.456.7.8"
Cannot connect to
The 2 SSIDs are secured with an encryption pass-phrase. The pass-phrase is the serial number of
the device and also can be located on the ID-Sticker (key).
7
Advertisement
