Polk Audio surroundbar User Manual page 14

polkaudio®
SurroundBARTM
IMPORTANT FIRST TIME SET UP INSTRUCTIONS
For the best surround sound experience, please make the following adjustments to your receiver:
1) Go to the receiver's Speaker Setup menu:
• Set all speakers-"Iarge"
• subwoofer-"off"
• center rear- "off"
Make sure your subwoofer is wired to the same outputs as the left and right front inputs to the SurroundBar™.
2) Set Delays:
If your receiver asks for the distance to each speaker, enter the actual distance from where you sit to the
SurroundBar™, and use the same distance for all speakers. If your receiver allows you to set the delay for center
and rear channels, setthe centerto "Zero" and the rear surround channels to "15" milliseconds. If in doubt, leave
settings at factory defaults.
3) Set levels:
• Set Left, Center and Right to "Zero"
• Set Left and Right surround levels to a minimum of "+3" dB. Don't hesitate to setto +6 or higher in
a more noisy listening environment.