Table of Contents
Advertisement
HOW TO RESET THE MEMORY OF
ACCUMULATIVE
COOKING TIME;
Note ; Number of the door operating time can
not be clear.
When new magnetron is replaced, accumulative
ooddng time must be set to "zero" as follows.
(1) Touch "C " key. The "O" will appear on the display.
(2) Touch "Clock matk" key. The colon and power
level ten bar will appear on the display.
(3) Touch number key "8" three times. The "8.88"
will appear on the display.
(4) Continuously
touch course key"1".
"88.81" will
(5)
(6)
m
appear on the display.
Touch "Start" key. All four digit will be flashing.
Touch "Start" key again. The displayed number
shows the accumulative
cooking time.
Touch "O" and "Memory" key. Accumulative
cooking time will be clear.
'.J
–13–
Advertisement
Table of Contents
