Table of Contents
Advertisement
CONNECTION
Securing the TEV-501 between
the front seats
Take one of the straps that does
not have an S-hook attached.
Place the strap around one of the
headrest supports on the driver
seat.
Fasten the strap around the head-
rest support using the two buckles.
Connect one of the strap's buckles
to the corresponding buckle on the
side of the bag. You can adjust the
length of the strap to suit the vehi-
cle's interior.
Repeat this procedure for the pas-
senger seat.
20
Now take one of the straps that
has an S-hook attached.
Connect the buckle of the S-hook
strap to one of the buckles at the
lower end of the case.
Place the strap around the seat rail
of the driver seat or the lower safe-
ty-belt attachment point.
Thread the strap through the S-
hook.
Pull the strap tight.
Repeat this procedure for the pas-
senger seat.
Open the case's upper lid.
Advertisement
Table of Contents
