Securing and installing the
TEV-501
Before using for the first time
Open the lower storage compart-
ment of the TEV-501's case, and
remove the cigarette lighter adapt-
er and the four straps.
Close the lower storage compart-
ment.
Remove the unit from its case.
Thread the adapter cable through
the opening in the case.
Connect the plug to the DC 12V E
input of the TEV-501.
Place the unit back into the case.
Secure the TEV-501 using the Vel-
cro straps that are located inside
the case by threading the Velcro
straps through the eyelets on the
side of the unit.
CONNECTION
DC 12V
19
19