Configuring The Basic Settings With Plug & Play; Accessing And Using The Main Menu - Samsung H5003 5-Series User Manual

11. lllntiguling llalaaia Ba'l!ingsWIII Plug &. llay
When you turn the 1V on for the first time, a sequence of prompts and screens will assist you in configuring basic
settings. Before you begin, make sure you have connected the 1V to an antenna or a cable connection and that the 1V
is plugged in. See
~~connections
II
for instructions. To begin Plug and Play, press the POWER button on your remote.
Then, follow the instructions on the 1V screen to configure the 1V 1
S
basic settings.
~ If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna or cable
connection before you turn on the TV.
~
To connect the power cord and antenna, refer to '4. Making Connections'.
I. Bhanging tbe laput Source
Source List
When you are watching 1V and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable
box or STB satellite receiver, you need to change the Source.
1.
Press the button on your remote.
2. Use the •r~ buttons to select an external input source.
•rv
I HDMI11 HDMI21DVII AV I Component
~ You can only choose external devices that are connected to the TV. In the Source List, connected inputs are
highlighted.
How to Use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button when
the Source List is displayed The following selections appear under Edit Name:
• VCR I DVD I Cable STB I Satellite STB I PVR STB I AV Receiver I Game I Camcorder I PC I DVI PC I DVII TV I
IPTV I Blu-ray I HD DVD I DMA: Select the name of the device connected to specific input jacks to make your input
source selection easier.
~
If you connect a PC to the HOM! IN 2 (DVI) port with an HOM I cable, assign PC to HOM I 1 in Edit Name.
~ If you connect a PC to the HDMIIN 2
Name.
port with an HOM I to DVI cable, assign DVI PC to HDMI 1 in Edit
~
If you connect an AV device to the HDMIIN 2 (DVI} port with an HOM I to DVI cable, assign DVI to HOM I 1 in Edit
Name.
II.
••••sing
and Using tile· Main Manu
Your 1VIs Main menu contains functions that let you control many of the 1V 1
S
features. For example, in the Main menu
you can change the size and configuration of the picture, its brightness, its contrast and so on. There are also functions
that let you control the 1VIs sound, channel configuration, energy use, and a host of other features. To access the main,
on-screen menu, press the MENU ([[[])button on your remote.
To use the Main menu, press the •r~ buttons to move between the main option categories: Picture, Sound, Channel,
etc. Each time you press a
•1~
button, the main category name on the left side of the menu changes.
To select a menu option in one of the categories, press the
~
button or the ENTER
G
button. Press it again or press
ENTER
G
to see the values or choices associated with that option. Usually, you would then press ENTER
[311
to select
a value or choice. Press the RETURN button or the
<111111
button to return to a previous screen or selection.
-6-