Advertisement
POPP HUB
QuickStart Manual
Info
This device is a control center (gateway) for Z-Wave home automation networks. It is used to control
different single devices as well as complete defined scenes and actions combining device functions
within the network. It needs only a few steps to get your Popp HUB up and running.
1
011801
Advertisement
Table of Contents
Related Manuals for Popp 011801
Summary of Contents for Popp 011801
- Page 1 This device is a control center (gateway) for Z-Wave home automation networks. It is used to control different single devices as well as complete defined scenes and actions combining device functions within the network. It needs only a few steps to get your Popp HUB up and running.
-
Page 2: Quick Start
Start adding Z-Wave devices and apps and have fun. To add your first Z-Wave device, go to Configuration Devices Z-Wave Add New and follow the instructions. The Popp HUB can be placed on the table or mounted on the wall using the mounting plate attached to the enclosure. It runs stand-alone (no connection to the outer world or to any other network) and connected to the Internet. -
Page 3: Leds And Buttons
• Support for EnOcean Devices In order to use EnOcean devices please plugin the Popp EnOcean Stick (POPE12204) into the USB Port. Start the user interface, open Configuration Apps and activate the EnOcean App. Now you can add and use EnOcean devices by using Configuration Devices. Please note that EnOcean devices are not self-describing but need to be identified before pairing. -
Page 4: Technical Data
The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from Popp & Co. We reserve the right to make any alterations that arise as the result of technical development.
Need help?
Do you have a question about the 011801 and is the answer not in the manual?
Questions and answers