Installation Guidelines The plug can be plugged into every wall outlet for Plug-Type Schuko. It is IP44 rated and can therefore be used both in dry environments as well as humid environments and outdoor. Do not locate the device facing direct sunlight or dusty place.
Local Operation The local button allows to switch the device. A short press on the button toggles the switch. If it is in ON state the button turns off and respective in OFF state the button turns on. Automated Switch-Off Function If activated the switch will turn off automatically after a defined time.
Page 5
What to do on RF Off-Command (Parameter number 3, Size 1) Defines how to interpret RF Off-Command. Can be used in conjunction with Auto Off function: Ignore – to switch on the light by motion detectors and switch it off after some amount of time: in case of multiple motion detectors each would try to switch the light off that would break logics;...
ASSOCIATION GROUP INFORMATION Version 1 DEVICE RESET LOCALLY Version 1 Z-WAVE PLUS INFORMATION Version 2 CONFIGURATION Version 1 MANUFACTURER SPECIFIC Version 1 PROTECTION Version 1 ASSOCIATION Version 2 VERSION Version 1 MULTI CHANNEL ASSOCIATION Version 2 MULTI CHANNEL Version 1 INDICATOR Version 1 Controlled command classes...
Page 7
Should you encounter any problem, please give us an opportunity to address it before returning this product. Most questions regarding Z-Wave wireless communication standard can be answered through the international community at www.zwave.info. If your question can‘t be answered there, please contact us by email: info@popp.eu...
Page 8
The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from Popp & Co. We reserve the right to make any alterations that arise as the result of technical development.
Need help?
Do you have a question about the IP44 and is the answer not in the manual?
Questions and answers