Yamaha R6 Owner's Manual page 64

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Plastic fastener
2. Projection
3. Wire harness
3. Remove the bolts and the quick
fastener, and then pull the cowling
off as shown.
7
1. Cowling C
2. Bolt
3. Quick fastener
To install the cowling
1. Fit the slot in cowling C over the
projection on the front cowling.
1. Cowling C
2. Slot
3. Front cowling
4. Projection
2. Install the bolts and the quick fas-
tener.
3. Place the wire harness in the orig-
inal position, and then close the
plastic fastener.
4. Install the cowling and the panel.
Panels A and B
To remove a panel
Remove the bolts, and then pull the
panel off as shown.
7-11
1. Panel B
2. Bolt
To install a panel
Place the panel in the original position,
and then install the bolts.
EAU39062