Turbo Boost Function; Temperature Lock - Remington S9500 Use & Care Manual

Take extra care when using the styler, as it can get very hot. It is important to
establish the correct temperature for your hair type prior to use, to prevent over
drying or damage to your hair. If in doubt, start with the low temperature setting
first, and increase the temperature gradually by pressing the "+" temperature
increase button.
To switch your styler off, press and hold the on/off switch for 1 second until
you hear an audible 'beep'.
Audible 'Beep' Function
When any of the switches are pressed there will be an audible 'beep' to confirm
your selection.

Turbo Boost Function

This styler features a turbo function which will automatically select the highest
temperature of 235ºC. To operate the turbo boost function press and hold the
'+' temperature increase button for 2 seconds. An audible 'beep' will confirm
your selection.

Temperature lock

This styler has a temperature lock to prevent the selected temperature from
being accidentally altered during use. When the selected temperature has been
reached, simply press and hold the' –' temperature decrease button for 2
seconds. An audible 'beep' will confirm your selection. This will lock the current
heat setting and a 'Lock'
To unlock the temperature lock, simply press and hold the '–' temperature
button for 2 seconds. An audible 'beep' will confirm your selection.
To Straighten Your Hair
• To make styling easier, part the hair either in the middle or to the side and
use clips to section your hair, top, sides and back.
• You may need to comb through your hair before straightening to ensure
that it is tangle free.
• Start at the nape of the neck and straighten the underneath sections of hair
first. When the underneath sections of hair are complete, move to the next
layers, finishing with the hair around the part line.
icon will be seen in the digital display window.
6