Assembling And Adjustments; General; Handle - Husqvarna LC 140 Operator's Manual

General

IMPORTANT! Prevent unintentional
!
starting by removing the ignition cable
from the spark plug.

Handle

Assembly
Top handle
• Place the handlebar's tubular construction in direct
opposite to the lower part of the handlebar.
• First, position the guide screw in the lower pipe in the
handle.
• Then, center one of the holes for the fixing screw to
the hole in the handle.
• Fit the screw, washer, and knob. Tighten the knobs
properly.
• Use enclosed cable holder to secure cables to the
handle. Do not overstretch cables when mounting.
22 – English

ASSEMBLING AND ADJUSTMENTS

Settings
• Loosen the lower knobs.
• Dismantle the knob, washer, and screw.
• Adjust to a suitable height with the fixing screw in one
of the three holes.
• Fit the screw, washer, and knob. Tighten the knobs
properly.