Panasonic DMP-BD10 Operating Instructions Manual page 10

Getting started
Connecting an amplifier/receiver (excluding HDMI connection)
Connecting to an amplifier/receiver with 7.1ch/5.1ch AUDIO IN terminal
You can enjoy surround sound using the 7.1ch AUDIO OUT terminals. The 7.1ch AUDIO OUT terminals offer you another option for
enjoying surround sound.
Back of the unit
Manufactured
SURROUND
DIGITAL AUDIO
OUT
L
R
(PCM/BITSTREAM)
COAXIAL
SURROUND
BACK
L
R
OPTICAL SUBWOOFER CENTER FRONT R /R
7.1ch AUDIO OUT
! "
Cable connections
Surround speaker (L/R)
Surround back speaker (L/R)
(Not necessary when connecting to 5.1 channel AUDIO IN)
Subwoofer
Center speaker
Front speaker (L/R)
Connecting to an amplifier/receiver with DIGITAL AUDIO IN terminal
You can enjoy surround sound using the DIGITAL AUDIO OUT terminals. The DIGITAL AUDIO OUT terminals offer you another option for
enjoying surround sound.
With COAXIAL IN
Back of the unit
Manufactured
DIGITAL AUDIO
(PCM/BITSTREAM)
COAXIAL
OPTICAL
With OPTICAL IN
Back of the unit
Manufactured
DIGITAL AUDIO
(PCM/BITSTREAM)
COAXIAL
OPTICAL
RQT8745
10
Connection
COMPONENT
2ch AUDIO OUT
VIDEO OUT
R L
Y
Please connect
1
directly to TV.
VIDEO OUT
P
B
2
P
R
FRONT L /L
S VIDEO
OUT
#
Coaxial cable
2ch AUDIO OUT COMPONENT
VIDEO OUT
R L
SURROUND
Y
Please connect
OUT
L
R 1 directly to TV.
VIDEO OUT
SURROUND
P B
BACK
L
R
2
P
R
SUBWOOFER CENTER FRONT R /R FRONT L /L
S VIDEO
7.1ch AUDIO OUT
OUT
Optical digital
audio cable
COMPONENT
2ch AUDIO OUT
VIDEO OUT
R L
SURROUND
Y
Please connect
OUT
R L
1 directly to TV.
VIDEO OUT
SURROUND
P
B
BACK
L
R
2
P R
SUBWOOFER CENTER FRONT R /R FRONT L /L
S VIDEO
7.1ch AUDIO OUT OUT
Multi channel speakers
Connect Audio
cables to
terminals
corresponding to
the speakers you
have connected.
Amplifier/receiver with
7.1/5.1ch AUDIO IN
COAXIAL IN
Amplifier/receiver with a
built-in decoder or a
decoder-amplifier/
receiver combination
OPTICAL IN
Amplifier/receiver with a
built-in decoder or a
decoder-amplifier/
receiver combination
This unit supports playback of
DVD-Video discs in surround
sound up to 5.1channels.
NOTE
Depending on how the disc was
recorded, the audio may not be
output properly on the number of
channels desired.
When playing BD-Video, only
LPCM or Dolby Digital Plus can be
output as 7.1ch.
NECESSARY SETTINGS
If the speaker setup cannot be
completed on the amplifier/
receiver, change multi channel
speaker settings by selecting
"Multi-channel" in "Speaker" of
"Connection" tab (➡ 22).
Only when this unit is
connected to an HDMI
compatible television (➡ 8, )
From the Setup menu (➡ 23), set
"HDMI Audio Output" to "Off".
Otherwise, audio is output as two
channels only, and also output
from the television's speakers.
You cannot use DTS Digital
Surround decoders (➡ 29,
Glossary) incompatible with DVD.
NOTE
Even if using this connection,
output will be only 2 channels
when playing DVD-Audio.
To enjoy multi-channel surround
sound, use connections
or (➡ above).
If the audio track of the disc was
recorded with Dolby Digital Plus, it
will be output as Dolby Digital
audio.
NECESSARY SETTINGS
Change the settings in "Digital
Audio Output" (➡ 22).
Only when this unit is
connected to an HDMI
compatible television (➡ 8, )
From the Setup menu (➡ 23), set
"HDMI Audio Output" to "Off".
Otherwise, the sound may not be
output with the desired settings.
(➡ 9)