Menu Structure; Accessing The Settings - Ariston E8.5064 Operating Instructions Manual

GB

menu structure

ACCESSING THE PARAMETERS
You need to open the door to access the parameter menu:
• turn the control to scroll through the fi elds and levels;
• press the programming button
• turn the control to scroll through the parameters;
• to change a parameter, press the programming button
control;
• press the programming button to save a change
GENERAL
SERVICE
SERVICE: command text for the technician
DATE/TIME/HOLIDAY: settings for the user
DISPLAY: To view the plant data (e.g. temperature measurements, set temperatures, etc.). No confi -
gurations are possible in this menu
USER: Parametri che possono essere impostati dall'utente
TIMER PROGRAMS: Confi guration of the hourly programs for the heating and sanitary circuits
EXPERT: Settings for confi guration solely by the technician. These settings are password protected
EXPERT HS:
INSTALLATION: Parameters applicable to the heat generators (heaters) or the overall plant. These
parameters do not apply to single user circuits.
HOT WATER: Parameters applicable to the sanitary hot water circuit.
HEATING CIRCUIT I AND II: Parameters applicable to the two user heating circuits.
SOLAR: For solar energy using the solar power control unit.
44
to enter the levels;
DISLPAY
DATE /
TIME
INSTALLA-
TION
HOT--
WATER
HTG
CIRCUIT 1
HTG
CIRCUIT 2
SOLAR /
MF
(red LED on) and turn the
(red LED off ).
TIME
USER
PROGRAM
CIRCL
INSTALLA-
TIME
TION
HOT -- HOTW - -
WATER PROG
HTG HTG--
CIRCUIT 1 PROG 1
HTG HTG--
CIRCUIT 2 PROG 2
SOLAR /
MF
EXPERT
INSTALLA-
TION
HOT--
WATER
HTG
CIRCUIT 1
HTG
CIRCUIT 2
SOLAR /
MF