Advertisement
SERVICE AND ADJUSTMENTS
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS
e
Depress brake-clutch pedal and Set parking brake.
e
Place shift control lever in NEUTRAL position.
•
Place attachment clutch lever In DISENGAGED position.
e
Turn ign!tlon key OFF and remove key.
®
Make sure the blades and all movtng parts have completely stopped.
TRACTOR
TO REMOVE MOWER DECK
Remove mower dec=kfrom right side of tractor+,
e
Place cutting height adjustment lever in lowest cutting
position,,
e
Remove hairpin cotter from mower deck hitch and
remove deck hitch rod from front hole of the front mount-
ing bracket (see RG. 18),,
Lower deck hitch.
O
O
Turn front wheels all the way to the left to allow mower
deck hitch to slide past right front wheel,.
e
Remove hairpin cotter and flatwasher from hanger pin of
right rear lift arm and slide off right mower deck lift
bracket (see FIG. 19),
e
Remove hairpin cotter and flatwasher from hanger pin of
left rear lift arm and slide off left mower deck lift bracket
(see FIG, 19)+
•
Flex lower engine pulley belt guide away from puitey (see
FIG. 20),,
e
Move mower deck forward and remove mower deck drive
belt from lower engine pulley+ Reposition belt guide_
e
Remove hairpin cotter and ftatwasher from hanger pin on
mower clutch lever betcrank strap assembty.,
e
Disconnect
mower deck engagement
spring
from
belcrank strap assembly (see FIG. 21),
e
Place cutting height adjustment lever in highest cutting
position,+
e
Slide mower deck out from under right side ot tractor.
TO INSTALL MOWER DECK
e
Place cutting height adjustment lever in highestcutting
position, If cutting height is not in highest position, the
deck brackets will hit the lift arms white slidingthe deck
under the tractor.
e
Place mower
deck on right side of tractor with
chute deflector away from tractor..
e
Turn front wheels of tractor to maximum left turn,
•
Liftdeck hitchand slidedeck undertractor to a centered
position+
e
From left side of tractor, slide deck rearward_ Then con-
nect mower deck engagement spring to hanger pin on
the mower clutch lever beicrank strap assembly, and
reinstall flatwasher
and hairpin cotter on hanger pin
(see FIG. 21)+
!
MOUNTING
BRACKET
COTTER
ROD
_ECKHRCH
VIEW FROM FRONT OF TRACTOR
FIG. 18
MOWER DECK
HAF _._-,R
LIFT BRACKET
PIN
REAR LIFT ARM
(RIGHT SIDE)
(RIGHT SIDE)
FLATWASHER
VIEW FROM RIGHT SIDE OF TRACTOR
FIG. 19
LOWER ENGINE
PULLEY BELT GUIDE
FIG. 20
23
Advertisement
