3M X62 Operator's Manual page 34

INPUT Menu
INPUT Menu (continued)
Item
RESOLUTION
*2
* Not all resolutions are guaranteed.
* For some pictures, this function may not work well.
34
Downloaded From projector-manual.com 3M Manuals
The resolution for the RGB and RGB input signals can be set on
this projector.
(1) In the INPUT menu select RESOLUTION using the ▲/▼ buttons and
press the ► button.
The RESOLUTION menu will be displayed.
() In the RESOLUTION menu select the
resolution you wish to display using the ▲/▼
buttons.
Selecting AUTO will set a resolution
appropriate to the input signal.
(3) Pressing the ► or Enter button when
selecting a STANDARD resolution will
automatically adjust the horizontal and
vertical positions, clock phase and horizontal
size and automatically select an aspect ratio.
The INFORMATION dialog (43) will be
displayed.
(4) To set a custom resolution use the ▲/▼
buttons to select CUSTOM and the CUSTOM
RESOLUTION BOX will be displayed. Set
the horizontal (HORZ) and vertical (VERT)
resolutions using the ▲/▼/◄/►
buttons. *
(5) To save the setting place the cursor on the
right-most digit and press the ► button.
The horizontal and vertical positions,
clock phase and horizontal size will be
automatically adjusted and an aspect ratio will
be automatically selected.
After the INFORMATION(43) dialog has
displayed for about 0 seconds the screen will
return to the RESOLUTION menu displaying
the changed resolution.
(6) To revert back to the previous resolution
without saving changes place the cursor on
the left-most digit and press the ◄ button.
The screen will then return to the RESOLUTION menu displaying the
previous resolution.
Description
RESOLUTION MENU
CUSTOM RESOLUTION
BOX
INFORMATION
RGB
80x 768@ 60
INFORMATION
RGB
99x 744@ 60