Technical Data - Weller WSD 81i Operating Instructions Manual

Technical Data

Soldering station
Dimensions L x W x H
Mains supply voltage
Power consumption
Safety class
Fuse
Temperature range
Temperature accuracy
Equipotential bonding
Equipotential bonding
a
b
c
d
Warranty
Claims by the buyer for physical defects are time-barred after a period of one year from delivery to the
buyer. This does not apply to claims by the buyer for indemnification in accordance with §§ 478, 479
BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a warranty furnished by us if the quality or durability warranty
has been furnished by use in writing and using the term „Warranty".
The warranty shall be void if damage is due to improper use and if the device has been tampered with by
unauthorised persons.
Subject to technical alterations and amendments.
Operating instructions are available for download at www.weller-tools.com.
12
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
WSD 81i
166 x 115 x 101 mm
(6.54 x 4.53 x 3.98 inch)
230 V ~ 50/60 Hz | 240/120 V ~ 50/60 Hz
120 V ~ 60 Hz | 100V ~ 50/60 Hz
95 W
I, antistatic housing
III, Soldering tool
T500 mA (230 V / 50/60 Hz)
T1,0 A (120V / 60 Hz)
T1,25 A (100 V / 50/60 Hz)
50 - 450 °C
150 - 850 °F
± 2%
Via 3.5 mm pawl socket on back of unit
(delivery form: hard grounded without jack plug)
Four variants are possible by connecting the 3.5 mm jack socket
differently:
a Hard-grounded
b Equipotential
bonding
c Floating
d Soft-grounded
supplied without plug.
with plug, equaliser at centre contact.
with plug
with plug and soldered resistor. Ground-
ed through selected resistor.