Table of Contents
Advertisement
Volume Level
The Volume Level adjustment controls the nominal level and provides for uniform level adjustments in real time. If the analog level
is driven to distortion, no adjustment of the this level will compensate for this distortion. If the Input Gain level is too low, the
Volume Level will not be able to raise it enough to compensate.
The AGC (Automatic Gain Control) works in the Volume Level and attempts to regulate the volume output based on the mic input
receiving the strongest signal.
Channel Volume
The Channel Volume section also enables users to adjust Input Gain and Volume Level on each of the Alero Input and Output
channels. Set each channel as needed.
Levels Page - Signal Levels Chart
FIG. 25
Signal Mixing
The Signal Mixing page enables users to specify which inputs to Alero are connected to specific outputs, which microphones are in
a mute group, and monitor mic activity and levels.
Signal Levels
The Signal Level chart is a real time reflection of the microphone input channels and Alero output channels activity and volume
levels.
Signal Levels
FIG. 26
Alero 8-Channel Microphone Mixer Instruction Manual
Configuration
12
Advertisement
Table of Contents
